Are you looking for solutions safer than mineral oil or to get away from multiphase cooling solutions or just want something much safer?
Try Bitcool for ASIC hardware miners.
BitCool BC-888 has been engineered specifically for use open SLIC tank solutions and for material compatibility with ASIC based cryptocurrency miners and similar blockchain applications.
BitCool is available in 20L, 200L, and 1,000L containers.
BitCool Dielectric Coolant is 98% biodegradable, non-toxic, non-halogenated, non-corrosive, food grade and 100% ozone safe. In addition, the use and manufacture of BitCool Dielectric Coolants release no toxic waste, vapors, or smell into your home, office, or workplace.
Biodegradable, non-toxic, not flammable
Non-allergenic, no vapors or smell, no impact on skin
Tested and proven compatibility with a wide range of materials
BitCool has been tested for use with the following ASIC-based mining devices.
BitCool BC-888 – Compatible ASIC-based Miners
|Baikal Miner||BK-B,N70, N+, X|
|BitMain ANTMINER™||A3, B3, D3, E3, G2, L3++, R4, S1-9i, T9+, V9, X3, Z9|
|Canaan Creative||Avalon 6, 741, 821, 841|
|Ebang||E9.2, E9.3, E10|
|GMO Miner||B2 (Pending Release and Testing)|
|Halong Mining||16T, B29, B52, T1|
|Innosilicon||A4+, A5+, A6, A5, A8+, A8C, A9, D9, S11,T2|
|Pangolin Miner||M3, MX3|
Key Characteristics of BitCool Dielectric Coolant
|Application||Single-phase, Liquid Immersion Cooling of ASIC-based Cryptocurrency Mining Devices|
|Key Characteristic||Compatibility with ASIC Mining Devices|
|Appearance||Light Green Tint|
|Pour Point (C)||< 0|
|Flash Point (C)||>130|
|Density, g/cc @ 16C||0.82|
|Coefficient of Thermal Expansion, volume/C||0.00068|
|Viscosity (cSt) @ 40C||10.03|
|Viscosity (cSt) @ 100C||4.00|
|Thermal Conductivity (W/m*K) 40C||0.1396|
|Thermal Conductivity (W/m*K) 100C||0.1373|
|Specific Heat (J/Kg*C) @ 40C||2054.00|
|Specific Heat (J/Kg*C) @ 100C||2203.20|
Once you determine which coin to mine, there are only three factors that impact your ability to make a profit in cryptocurrency mining. While you cannot control the exchange rates, you must be hyper-focused on your hashrates and your power usage, if not you are literally allowing your potential profitably blow away in wind (or should we say fan noise)!
Single-phase, Liquid Immersion Cooling (SLIC) is the most cost effective way to get the maximum hashrate from any ASIC or GPU based miner. By immersing your mining hardware in our specially formulated BitCool BC-888 Dielectric Coolant you have the ability to dramatically reduce your overall power costs and dramatically increase your hashrates.
SLIC is so efficient because our purpose engineered BitCool Dielectric Coolant has more than 1,600x the heat density of air, By immersing your miners in BC-888 Dielectric Coolant you can eliminate all the air handling units, barn fans, A/C units, even the fans on the miners themselves (and by the way all those fans can consume up 35% of all the energy you are buying!).
In addition, because BitCool BC-888 is so efficient at removing heat you can safely overclock your miner’s hashrate without endangering your expensive equipment. This is critical because if you are going to overclock you must keep your equipment within its safe operational temperature range or you risk catastrophic heat related failures.
One the best features of SLIC is of course the noise, or rather the lack of noise! When you eliminate all those fans, you instantly cut fan noise to zero, we guarantee your family, friends and neighbors will really appreciate the new silence, and so will you!
Do you do GPU or other hardware mining or need a solution to cool other electronics or electrical systems? Please contact us today for a consultation.